LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1720 (Cooling System - Repair) >> Engine Radiator >> Removing radiator cover

Removing radiator cover

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Illustrations show M54: 

IMPORTANT: Do not place front panel center section (2) on jump start terminals.
Do not kink Bowden cables for engine hood locking.

Release screws (1).

Remove front panel center section (2) in direction of arrow and place to one side.

Fig 1: Removing Front Panel Center Section And Screws
G05502196Courtesy of BMW OF NORTH AMERICA, INC.

Illustrations show M54: 

Release screws (1).

Remove radiator cover (2) in direction of arrow.

Fig 2: Removing Radiator Cover And Screws
G05502197Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals