11 23 010 Removing and installing or replacing vibration damper

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach front UNDERBODY PROTECTION .
Remove DRIVE BELT .

Release screws (1).

Tightening torque: 11 23 1AZ .

Remove vibration damper (2).

Fig 1: Identifying Screws And Vibration Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.