71 60... Replacing gaiter for self-swinging-out trailer tow hitch (from 03/2007)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Necessary preliminary tasks:

Remove rear BUMPER TRIM

Unclip cable holder (1).

Lever out gaiter (2) with special tool 00 9 317 and slide in direction of arrow.

Swing out self-swinging-out trailer tow hitch.

Fig 1: Removing Gaiter With Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove socket (2).

Tightening torque 71 60 3AZ .

Fig 2: Identifying Screws And Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off gaiter (1) in direction of arrow from ball rod.

Fig 3: Pulling Off Gaiter Of Ball Rod

Courtesy of BMW OF NORTH AMERICA, INC.