61 31 233 Removing and installing/replacing Lane Departure Warning motor electrics (sport steering wheel)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DECORATIVE BAR FROM STEERING WHEEL

Release screws (1) and remove retaining plate (2).

Tightening torque 32 33 2AZ .

Fig 1: Identifying Retaining Plate And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2).

Release screws (3) and remove motor electrics (4) complete with electrical wires.

Installation:

Replace screws (2 and 3).

Tightening torque 32 33 3AZ
Tightening torque 32 33 4AZ

Ensure correct cable routing.

Fig 2: Identifying Motor Electrics, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.