61 13 042 Replacing distribution box (luggage compartment)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INSTRUCTIONS for handling vehicle battery.

Necessary preliminary tasks:

Remove LUGGAGE COMPARTMENT TRIM ON SIDE PANEL ON RIGHT
Disconnect negative battery cable

Security version:

Remove protective cover from distribution box/battery positive terminal (luggage compartment)

Open cover (1) and release nut underneath.

Tightening torque 61 21 2AZ .

Disconnect plug connection (2) in direction of arrow.

Fig 1: Identifying Cover And Plug Connection

G05478560

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2) and remove distribution box.

Fig 2: Identifying Distribution Box Screws And Plug Connection

G05478561

Courtesy of BMW OF NORTH AMERICA, INC.

Security replacement only:

Remove rib (1).

Fig 3: Identifying Rib

G05478562

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rib (1).

Fig 4: Identifying Rib

G05478563

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove fuses and relays.