33 4 400 Puller fixture

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Note: For removing inner wheel bearing races on rear axle

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1

SI number: 1 05 99 (426)

Order number: 33 4 400

Puller fixture

Consisting of:

1 = 33 4 401 Basic body

2 = 33 4 402 Spindle

3 = 33 4 403 Wrench, large

4 = 33 4 404 Wrench, small

5 = 33 4 405 Clamping pliers (45...51 mm)

6 = 33 4 406 Clamping pliers (50...55 mm)

7 = 33 4 407 Clamping pliers (55...61 mm)

NOTE: Model series: E67

Fig 1: Identifying Puller Fixture (33 4 400)

Courtesy of BMW OF NORTH AMERICA, INC.