33 3 310 Removal/installation tool kit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 181 (E46)

Note: For removing and installing rubber mounts in rear axle suspension, front and rear

Series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, R53, RR1

Storage location: A7

SI number: 1 05 90 (207)

Order number: 33 3 310

Removal/installation tool kit

Consisting of:

1 = 33 3 311 Locator sleeve

NOTE: For removing and installing rubber mount / model series: E31, E36

2 = 33 3 312 Thrust piece

NOTE: For removing rubber mount at rear differential cover / model series: E31, E36, E38, E60, E61, E63, E64, E65, E66, E67, RR1

3 = 33 3 313 Thrust piece

NOTE: For installing rubber mount on rear differential cover - model series: E31, E36, E38 For removing rubber mount at rear differential cover - model series: E46

4 = 33 3 314 Spindle

NOTE: For removing and installing rubber mount Model series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1

5 = 33 3 315 Nut with bearing

NOTE: Model series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1

6 = 33 3 316 Thrust piece

NOTE: For installing rear rubber mount in rear axle carrier / model series: E31

In conjunction with: 33 3 333 and 33 3 334

Fig 1: Identifying Removal/Installation Tool Kit (33 3 310)

Courtesy of BMW OF NORTH AMERICA, INC.