31 3 350 Spring holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 31 3 340 and 31 3 360

Note: For locating coil springs during tensioning. No. 31 3 350 reserved for consecutive sub-number spring tensioner 31 3 340.

Series: E31, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, R50, R52, R53, R55, R56

Storage location: Single

SI number: 1 11 99 (438)

Order number: 31 3 350

Spring holder

Consisting of:

1 = 31 3 351 Spring holder (2 x)

NOTE: To be used with repair instructions only

2 = 31 3 352 Spring holder (2 x)

NOTE: To be used with repair instructions only

3 = 31 3 353 Spring holder (2 x)

NOTE: To be used with repair instructions only

4 = 31 3 354 Spring holder ring

NOTE: To be used with repair instructions only

5 = 31 3 355 Spring holder

NOTE: To be used with repair instructions only

6 = 31 3 356 Centering ring

NOTE: To be used with repair instructions only

7 = 31 3 357 Spring holder (2 x)

NOTE: To be used with repair instructions only

In conjunction with: 31 3 340

8 = 31 3 358 Insertion ring

NOTE: To be used with repair instructions only. For insertion in spring retainer ring 31 3 354. Model series: E87

9 = 31 3 381 Spring retaining ring

NOTE: To be used with repair instructions only.

10 = 31 3 382 Spring retainer

NOTE: To be used with repair instructions only.

11= 31 3 383 Spring retainer

NOTE: To be used with repair instructions only.

Fig 1: Identifying Spring Holder (31 3 350)

G04739422

Courtesy of BMW OF NORTH AMERICA, INC.