24 2 310 Tool kit for removing and installing reverse gear piston

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Note: For disassembling and assembling transmission for "Sealing intermediate plate" job

Transmission: A4S 270R, A4S 310R

SI number: 1 22 97 (239)

Order number: 24 2 310

Tool kit for removing and installing reverse gear piston

Consisting of:

1 = 24 2 311 Pressure plate

NOTE: For removing and installing spring retainer

2 = 24 2 312 Spindle with pressure plate

NOTE: Spindle M14 x 1.5, nut M14, pressure plate and washer / For removing and installing spring retainer

3 = 24 2 313 Guide pin (2)

NOTE: For fixing gaskets and intermediate plates on intermediate housing

4 = 24 2 314 Slip bush

NOTE: For removing piston in cylinder of intermediate plate

Fig 1: Identifying Tool Kit (24 2 310) For Removing And Installing Reverse Gear Piston

Courtesy of BMW OF NORTH AMERICA, INC.