11 8 530 Removal and installation tool
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
Note: For removing and installing sealing cap on vacuum pump.
Engine: N53, N54
SI number: 1 20 06 (299)
Order number: 11 8 530
Removal and installation tool
Consisting of:
1 = 11 8 531 Baseplate
2 = 11 8 532 Pressure plate
3 = 11 8 533 Spindle (pressure plate)
4 = 11 8 534 Spindle (removal plate)
5 = 11 8 535 Set of M10 screws (N54)
6 = 11 8 536 Set of M11 screws incl. sleeve (N53)
7 = 11 8 537 Removal plate