11 6 260 Mounting sleeves with case

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For installing pistons of 85 mm diameter (urgently required for pistons with U-Flex ring)

Engine: M43TU, M44, N51, N52, N52K, N53, N54

Order number: 11 6 260

Mounting sleeves with case

Fig 1: Identifying Mounting Sleeves With Case (11 6 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 11 6 261 Assembly bush

NOTE: Diameter 85.00 mm

2 = 11 6 262 Assembly bush

NOTE: Diameter 85.08 mm, repair

3 = 11 6 263 Assembly bush

NOTE: Diameter 85.25 mm, stage 1

4 = 11 6 264 Assembly bush

NOTE: Diameter 85.50 mm, stage 2

9 = 11 6 269 Case with foam inlay

NOTE: For holding assembly bushes, gauge 11 6 270 and lever gauge 11 6 250