00 8 000 Hydraulic puller tool

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

In conjunction with: With all previous removal/installation tools for rubber mounts.

Note: For removing and installing rubber mount in rear axle carrier.

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, R50, R52, R53, RR1

Fig 1: Identifying Hydraulic Puller Tool (00 8 000)

Courtesy of BMW OF NORTH AMERICA, INC.

Storage location: Single

SI number: 01 02 99 (417)

Order number: 00 8 000

Hydraulic puller tool

Consisting of:

1 = 00 8 001 Hydraulic pump

2 = 00 8 002 Hydraulic hose

3 = 00 8 003 Hydraulic cylinder

00 8 004 Threaded spindle

NOTE: M14 x 520

00 8 005 Threaded spindle

NOTE: M12 x 496

00 8 006 Threaded spindle (optional)

NOTE: M14 x 465

00 8 007 Nut M18

00 8 008 Securing line

00 8 009 Spindle with nut