00 2 300 Assembly stand with universal flange

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Note: For accommodating engines from S85

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45 N46, N51, N52, N53, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17

Fig 1: Identifying Assembly Stand With Universal Flange (00 2 300)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number: 01 25 04 (155)

Order number: 00 2 300

Assembly stand with universal flange

Consisting of:

1 = 00 2 301 Assembly stand

2 = 00 2 302 Universal flange

3 = 00 2 303 Crank

4 = 00 2 304 Protection hood

5 = 00 2 305 Storage for small parts

6 = 00 2 306 Molded tray, rear

7 = 00 2 307 Oil drip tray

8 = 00 2 308 Molded tray, front

9 = 00 2 309 Wheel, front (without stop)

10= 00 2 311 Wheel, rear (with stop)

11= 00 2 312 Set of rippled mats