65 11 075 Removing and installing/replacing DVD changer

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) . See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove luggage compartment trim on side panel on right . 51 47 220 REMOVING AND INSTALLING/REPLACING TRUNK TRIM PANEL ON RIGHT SIDE PANEL .
Disconnect battery negative lead . See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Remove luggage compartment trim on left side panel . See 51 47 210 REMOVING AND INSTALLING/REPLACING TRUNK TRIM PANEL ON LEFT SIDE PANEL .

NOTE: Comply with notes and instructions on handling optical waveguides . See 61 00... NOTES ON HANDLING OPTICAL FIBERS .

Release screws (1).

Pull DVD changer (2) out of fixture (3).

Unlock and disconnect associated plug connection, remove CD changer (2).

Fig 1: Removing DVD Changer Out Of Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove both holders (2) from DVD changer (3).

Installation:

If necessary, remove transportation lock.

Fig 2: Identifying Both Holders From DVD Changer And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding .