64 11 916 Replacing temperature sensor for cold-air distributor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove audio system controller / Car Communication Computer. See 65 12 200 REMOVING AND INSTALLING (REPLACING) AUDIO SYSTEM CONTROLLER .
Release screws (1).
Fold back middle function carrier (2) in direction of arrow.
Installation:
Make sure middle function carrier (2) is correctly seated.
Turn temperature sensor for cold-air distributor (1) through approx. 90° and pull out in direction of arrow.
Unfasten plug connection (2) and disconnect.
Installation:
Make sure temperature sensor for cold-air distributor (1) is correctly seated.