64 11 475 Removing and installing complete cooler box (long version)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear seat . See SEATS - REPAIR INSTRUCTIONS .
Remove rear head restraints. See SEATS - REPAIR INSTRUCTIONS .
Partially detach backrests . See SEATS - REPAIR INSTRUCTIONS .

Remove cover (1) to right.

Installation:

Ensure that cover is firmly seated.

Fig 1: Identifying Cooler Box Cover

G05478927

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Modify left backrest (2).

Fig 2: Identifying Cooler Box Screw

G05478928

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 3: Identifying Cooler Box Screw

G05478929

Courtesy of BMW OF NORTH AMERICA, INC.

Release plug connection (1) and associated cable tie.

Fig 4: Identifying Plug Connection

G05478930

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

IMPORTANT: When removing cooler box (2), take care not to damage vehicle equipment.

Remove cooler box (2) completely in direction of arrow from vehicle.

Fig 5: Identifying Cooler Box And Screws

G05478931

Courtesy of BMW OF NORTH AMERICA, INC.