52 26 303 Removing and installing/replacing actuator for left or right rear seat backrest (through-loading system)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Unclip Bowden cable (1).
Loosen screws (2).
Unlock catch (3) to center of car and at same time unclip actuator towards bottom (4). If necessary, insert special tool 00 9 317 between actuator and body for levering out.
Installation:
Catches (1) and (2) of actuator (3) must not be damaged.
Bowden cable (4) must be correctly engaged in actuator (3).