LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1674 (Seats - Repair) >> Rear Seat Normal >> 52 24 030 Removing and installing complete armrest (basic) for rear seat backrest

52 24 030 Removing and installing complete armrest (basic) for rear seat backrest

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Pull up cover (1) between armrest and rear seat back.

Release expansion rivets (2) on trim.

Remove trim (3) towards top, feeding out over armrest buckle latch.

Fig 1: Pull Up Cover (1) Between Armrest And Rear Seat Back
G04742922Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque: 52 24 5AZ  . See 24 REAR SEAT, NORMAL .

Remove armrest (2) towards front.

Fig 2: Remove Armrest (2) Toward Front
G04742923Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals