52 24 005 Removing and installing or replacing rear seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Unclip rear seat on left/right towards top.

Lift out seat.

Installation:

Feed belt buckles (1) through designated openings into correct location.

Guide lap belt behind seat edge upwards.

Make sure ISOFIX covers are correctly engaged.

Fig 1: Identifying Belt Buckles

Courtesy of BMW OF NORTH AMERICA, INC.

For op. ext. seat heating only:

Unfasten plug connection.

Fig 2: Unfasten Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.