52 13 393 Removing and installing/replacing front left or right crash-active head restraint (up to 9/2007)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Read and comply with safety regulations
for handling airbag modules and pyrotechnical belt pretensioners. See 72 00... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS
.
Incorrect handling may result in triggering of the crash-active head restraint and thereby cause injury.
Incorrect handling may result in triggering of the crash-active head restraint and thereby cause injury.
Switch off ignition!
Necessary preliminary tasks:
- Disconnect battery negative lead . See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
- Remove rear panel
Unfasten plug connection (1) and disconnect.
Feed wiring harness out of backrest frame.
Lift out head restraint.