52 14... Removing and installing outer upper rail trim with electric anchor fitting tensioner (from 04/2004)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Driver's seat only:

NOTE: Version with anchor fitting tensioner from 04/2004.

Lever trim (3) out of seat mechanism:

upwards,
slide towards rear and feed out of anchor fitting tensioner.

Fig 1: Identifying Driver's Seat Positions
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Secure plug connection with felt strip against unlocking.

Lock on plug connection to anchor fitting tensioner can be unlocked when trim is fitted.