51 24 130 Removing and installing/replacing striker for rear lid lock

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim on rear apron.

Release screws (1).

Remove striker for rear lid lock (2) (lower section of rear lid lock).

Installation:

Adjust rear lid lock.

Fig 1: Identifying Striker For Rear Lid Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Striker and rear lid lock must not be greased.