51 48 001 Removing and installing/replacing insulation lining on hood/bonnet
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Illustration created using the E87 as an example. There may be differences in detail in the case of other vehicle models.
Release threaded rivets (1) on insulation lining (2).
Remove insulation lining (2).
Installation:
If necessary, replace defective threaded blind rivets (1).