51 47... Removing and installing/replacing left or right underbody panelling
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Hexagon screw in the tunnel bridge area is designed with different washer diameters.
Release plastic nuts.
Release screws (1 to 3).
If necessary, release screw (5).
Release screws (4) and remove underbody panelling in direction of arrow.
Installation:
Replace damaged plastic nuts.