35 40 001 Removing and installing/replacing accelerator pedal module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Installation:

Tightening torque, 35 40 1AZ . See 35 40 PEDALS .

Fig 1: Pulling Accelerator Pedal Module Upward

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.