34 00 010 Checking thickness of brake pad

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

34 1 260

NOTE: The thickness of the outer brake pads can be determined without removing the wheels.
If necessary, move car until opening for brake pad wear indicator (brake pad) can be seen through rim styling.

Insert special tool 34 1 260 through rim into opening for brake pad wear indicator.

Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.

NOTE:

Brake disk
Brake pad with backplate

SAFE LIMIT FOR LINING WEAR, FRONT BRAKE .

SAFE LIMIT FOR LINING WEAR, REAR BRAKE .

Fig 1: Inserting Special Tool 34 1 260 Through Rim

Courtesy of BMW OF NORTH AMERICA, INC.