24 00 018 Adjusting selector lever (A5S 360R / 390R, A4S 200R, 6HP26Z/19Z)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Check cable for ease of movement.
Move selector lever to "P" position. Control for emergency release must not be actuated.

Unfasten nut.

Tightening torque 25 16 10AZ . See 16 CENTRE SHIFT AUTOMATIC .

Remove cable (1).

Installation: Adjust cable.

Release nut
Adjust cable by means of holder (2)
Spacing A = 1.5 mm

Fig 1: Identifying Cable Holder

Courtesy of BMW OF NORTH AMERICA, INC.