17 11 000 Removing and installing radiator (N52)

WARNING: This page is about a different car, the 2009 BMW 528xi, 2009 BMW 528i, 2008 BMW 528xi, and 2008 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of scalding!
Only perform this work after engine has cooled down.

Necessary preliminary tasks:

Follow instructions for working on cooling system .
Remove fan cowl
Drain coolant
Unlock and detach all coolant hoses on radiator.

If fitted:

Unlock spring clip (1) in direction of arrow.

Remove heat exchanger (2) in direction of arrow.

Installation:

Attach heat exchanger (2) in upper retaining lug.

Fig 1: Identifying Heat Exchanger

Courtesy of BMW OF NORTH AMERICA, INC.

Remove radiator (1) towards top.

Installation:

Ensure correct seating in side guides.

Fig 2: Identifying Radiator

Courtesy of BMW OF NORTH AMERICA, INC.

Top up coolant .

Vent cooling system and check for leaks .