61 31 270 Replacing switch for reversing light

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The installation location of the reversing light switch can vary, depending on the transmission model.

Necessary preliminary tasks:

If necessary, remove REAR UNDERBODY PROTECTION

Version A:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque 61 31 2AZ .

Fig 1: Identifying Switch For Reversing Light And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque 61 31 2AZ .

Fig 2: Identifying Switch For Reversing Light And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.