61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Risk of damage!
Protect middle fresh-air grille decorative trim in working area against damage, tape off if necessary.
Protect middle fresh-air grille decorative trim in working area against damage, tape off if necessary.
Lever out switch for hazard warning system/central locking (1) with special tool 64 1 020 and pull back.
Disconnect associated plug connection and remove switch for hazard warning flashers/central locking (1).