00 5 010 Universal puller

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For withdrawing radial seals 00 5 011 for E90

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2

Fig 1: Identifying Special Tool - 00 5 010 Universal Puller

Courtesy of BMW OF NORTH AMERICA, INC.

Storage location: A14

Order number: 00 5 010

Universal puller

Consisting of:

1 = 00 5 011 Extractor claw (3 pieces required)

2 = 00 5 012 Guide spindle

3 = 00 5 013 Pressure spindle

4 = 00 5 014 Take-up start

NOTE: For taking up extractor claws

5 = 00 5 015 Thrust member