00 0 220 Special tool cabinet, length 2 m

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Dimensions: (LxHxD) 2.05 m x 2.10 m x 0.65 m For extended accommodation of special tools. IMPORTANT! Use Order No. 00 1 000 to erect a complete 6 m long special tool cabinet.

SI number: 0 01 00 (549)

Order number: 00 0 220

Special tool cabinet, length 2 m

Fig 1: Identifying Special Tool - 00 0 220 Special Tool Cabinet, Length 2 M

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 00 0 221 Frame with roller shutter

NOTE: Basic frame for erecting a separate 2 m long special tool cabinet. NOTE: If ordered individually as a mounting frame, the complete scope of delivery must already be present under Order No. 00 0 220. Overall length with a mounting frame: 4 m

In conjunction with: 00 0 225 / Not available without roller shutter for stability reasons!

2 = 00 0 222 Side panel, left

NOTE: Required only once for erecting the basic frame

3 = 00 0 223 Side panel, right

NOTE: Required only once for erecting the basic frame

4 = 00 0 224 Large special tool board 2 m x 1 m

NOTE: This special tool board serves as the rear panel of basic and mounting frames and is the basis for large stationary and moving special tool boards.

In conjunction with: Hook set and films

5 = 00 0 225 Roller shutter, lockable

NOTE: Included in scope of delivery 00 0 221. This order number is for reordering purposes only.

6 = 00 0 226 Side frame

NOTE: Required only once for setting up the basic frame