64 5 100 Set of sealing adapters

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For closing off line flanges of A/C components (evaporator, condenser, compressor) for leak testing. Special tool 64 5 101 replaced by 64 5 105 (from 01/2005).

Series: E32, E34, E36, E38, E39, E46, E53, E60, E61, E63, E64, E70, E81, E83, E87, E90, E91, E92, E93

SI number: 1 17 98 (359)

Order number: 64 5 100

Set of sealing adapters

Fig 1: Identifying Special Tool - 64 5 100 Set Of Sealing Adapters

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 64 5 104 Connecting hose

NOTE: For connecting pressure cylinder to filler adapter

2 = 64 5 102 Sealing adapter

NOTE: For closing off intake line

3 = 64 5 103 Sealing adapter

NOTE: For closing of intake connection on compressor

4 = 64 5 105 Filler adapter

NOTE: For closing off the pressure line and connection at connecting hose (replacement for special tool SWZ 64 5 101 since 01/2005)

5 = 64 5 106 Sealing adapter

NOTE: For closing off line during leak test (included in scope of delivery from 01/2005)

6 = 64 5 107 Sealing adapter

NOTE: For closing off line during leak test for E81, E87, E90, E91, E92, E93 (included in scope of delivery from 02/2007)

7 = 64 5 108 Sealing adapter

NOTE: For closing off line during evaporator leak test in E70 (included in scope of delivery from 02/2007)