34 1 130 Installation sleeves

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For mounting dust caps on brake piston

Series: E39, E52, E53, E60, E61, E63, E64, E65, E66, E67

Storage location: A35

SI number: 1 01 97 (173)

Order number: 34 1 130

Installation sleeves

Consisting of:

34 1 132 Press-in sleeve

NOTE: Diameter 58 mm for rear dust cap - Series: E52, E53, E60, E65, E66, E67

34 1 133 Sleeve

NOTE: For installing dust sleeve on floating caliper of front axle - Series: E53, E65, E60, E66, E67

Fig 1: Identifying Special Tool - 34 1 130 Installation Sleeves

Courtesy of BMW OF NORTH AMERICA, INC.