33 4 400 Puller fixture

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing inner wheel bearing races on rear axle

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1

SI number: 1 05 99 (426)

Order number: 33 4 400

Fig 1: Identifying Special Tool - 33 4 400 Puller Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Puller fixture

Consisting of:

1 = 33 4 401 Basic body

2 = 33 4 402 Spindle

3 = 33 4 403 Wrench, large

4 = 33 4 404 Wrench, small

5 = 33 4 405 Clamping pliers (45...51 mm)

6 = 33 4 406 Clamping pliers (50...55 mm)

7 = 33 4 407 Clamping pliers (55...61 mm)

NOTE: Model series: E67