33 2 110 Removal and installation tool

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 2 150 (E53)

NOTE: For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit.

Series: E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2

Storage location: C13, C14, C38

Fig 1: Identifying Special Tool - 33 2 110 Removal And Installation Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Order number: 33 2 110

Removal and installation tool

Consisting of:

1 = 33 2 111 Pressure spindle

NOTE: For pressing out. Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85

4 = 33 2 114 Spindle

NOTE: For installation / model series: E30

5 = 33 2 115 Nut with bearing

NOTE: Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1

6 = 33 2 116 Bridge

NOTE: New version 09/98 Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, E90, RR1

7 = 33 2 117 Threaded piece

NOTE: Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85

8 = 33 2 118 Spindle for installation

NOTE: Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83

9 = 33 2 119 Spindle

NOTE: For installation / model series: E36, E46