33 2 100 Clamping fixture

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For gripping output shafts when press-fitting constant-velocity joint

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1, RR2

Storage location: C23

SI number: 1 06 94 (801)

Fig 1: Identifying Special Tool - 33 2 100 Clamping Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Order number: 33 2 100

Clamping fixture

Consisting of:

1 = 33 2 101 Frame

2 = 33 2 102 Insert shell (2 x)

NOTE: Diameter 30 mm - model series: E38 / model: 730i

3 = 33 2 103 Insert shell (2 x)

NOTE: Diameter 35 mm - model series: all, except E38