21 2 140 Clutch centering mandrel (2 x)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
NOTE:
For centering clutch disc on flywheel while installing self-adjusting clutch (SAC) - Phase-in of SAC in E46, 09/97
Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z, S6S 420G, S6S 560G
Storage location: B4
SI number: 1 13 96 (104)
Order number: 21 2 140
Clutch centering mandrel (2 x)
Consisting of:
1 = 21 2 141 Clutch centering tool
NOTE:
With M10 screw - Transmission: S6S 420G, S6S 560G
2 = 21 2 142 Clutch centering tool
NOTE:
With M10 screw - Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z