LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1627 (Cooling System - Tightening Torques) >> 22 Oil Cooler Lines >> 17 22 Oil Cooler Pipes

17 22 Oil Cooler Pipes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL COOLER PIPES

  Type Thread Measure
5AZ Cap nut on transmission oil cooler (on radiator) and on transmission All M18x1.5 20 Nm
  5HP30 M22 x 1.5 28 Nm
6AZ Oil lines on transmission      
Hollow bolt All M16x1.5 37 Nm
7AZ Oil lines on transmission oil cooler A 5 S 300 J   28 Nm
Hollow bolt All M14x1.5 27 Nm
8AZ Screw-in fitting on transmission All M14x1.5 und M16x1.5 37 Nm
9AZ Oil hose on oil pipe E23   28 Nm
10AZ Oil pipe bracket on radiator E23   2 Nm
11AZ Oil pipe bracket on body E23   6.5 Nm
12AZ Oil cooler on transmission 5HP30   10 Nm
13AZ Transmission oil cooler line to transmission N42 M8 21 Nm


TIGHTENING TORQUE SPECIFICATIONS - OIL COOLER PIPES

  Type Thread Measure
1AZ Transmission oil cooler line to transmission N52K M8x28 20 Nm
2AZ Transmission oil cooler line to oil sump N52K M6 10 Nm
3AZ Transmission oil cooler line to transmission sump N52K M6x35 8 Nm
4AZ Transmission oil cooler line to transmission oil-water heat exchanger N52K M6x35 8 Nm
5AZ Engine oil cooler lines to oil module/engine oil cooler N52K M8 20 Nm