17 00 Coolant
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - COOLANT
| Type | Measure | |
|---|---|---|
| 1AZ Hose clamps to coolant hoses 32... 48 mm dia. | All | 2.5 Nm |
| 2AZ Bleed screw (WAF 8) to thermostat housing | All, without E46 | 8 Nm |
| Plastic bleed screws to coolant lines | E46 | 2 -0.5/+1 Nm |
| 3AZ Level switch (WAF 30) to coolant expansion tank | All | 3 Nm |
| 4AZ Bleed screw to water valve or auxiliary water pump | E90 / E91 | 3.5 Nm |