11 61 Air intake manifold
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIR INTAKE MANIFOLD
| Type | Thread | Measure | |
|---|---|---|---|
| 1AZ Hexagon screws (4x) Air intake manifold to cylinder head. |
N52K | M7 x 50 | 15 Nm |
| 2AZ Hexagon nuts (3x) Air intake manifold to cylinder head. |
N52K | AM7 (to DIN 439) | 15 Nm |
| 3AZ Hose clamp (1 x) Clean-air gaiter to connection, throttle valve assembly. |
N52K | L80-100 | 3 Nm |
| 4AZ Ejot screw (1 x) Fuel line to intake manifold |
N52K | 50 x 20 | 6 Nm |
| 5AZ Oval-head screw (2 x) Holder, engine wiring harness, to intake manifold. |
N52K | M6 x 10 | 8 Nm |