11 13 Oil Pan
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PAN
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Optional extra designation: SA203 = All-wheel drive SA205 = Automatic transmission |
||||
| 1AZ Plug (1x) Oil drain to oil sump. |
N52K | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ ASA screw (20 x with optional extra SA203) (23 x with optional extra SA205) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 x 26 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90° | |||
| 3AZ ASA screw (5 x M8 x 112 with optional extra SA203) (2 x M8 x 112 with optional extra SA205) (3 x M8 x 92 with optional extra SA203 or SA205) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 180° | |||
| 4AZ ASA screw (1 x M8 x 36) (1 x M8 x 44) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90° | |||
| 5AZ ASA screw (28 x without optional extra SA203 or SA205) Oil sump (sheet metal) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 x 24 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90° | |||
| 6AZ ASA screw (6 x without optional extra SA203) (7 x with optional extra SA203) Oil deflector to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M6 x 20 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 90° | |||
| 7AZ ASA screw (3x) Transmission to oil sump. |
N52K | M8 x 50 | 19 Nm | |
| 8AZ Hexagon nut (2x) Holder, transmission oil cooler line, to oil sump. |
N52K | BM6 | 8 Nm | |
| 9AZ Hexagon nut (1x) Holder, coolant hose, to oil sump. |
N52K | M6 | 9 Nm | |
| 10AZ Hexagon screw (1x) Holder, coolant hose, to oil sump. |
N52K | M10 x 18 | 21 Nm |