12 41 Starter motor with mounting
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STARTER MOTOR WITH MOUNTING
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x85 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180° | |||
| 2AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 90° | |||
| 3AZ Battery positive lead to starter | N52, N52K, N51, N53 | M8 | 13 Nm |