12 52 Plug connections, terminals, loose parts
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - PLUG CONNECTIONS, TERMINALS, LOOSE PARTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52, N54 | M6x12 | 8 Nm | |
| 2AZ Cable duct to cylinder head cover | N52, N54, N53 | M6 | Replace screws | |
| Jointing torque | 3 Nm | |||
| Torque angle | 45° | |||
| 3AZ Ground cable to crankcase (electrcoolant pump) | N52, N54, N52K, N51, N53 | M8 | Replace screws | |
| Jointing torque | 8 Nm | |||
| Torque angle | 45° | |||
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | 8 Nm |