13 11 Carburetor
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CARBURETOR
| Type | Measure | |
|---|---|---|
| 1AZ Carburetor to intake manifold | M10/M20/M30 | 10 Nm |
| 2AZ Carburetor to insulating flange | M10/M20/M30 | 10 Nm |
| 3AZ Insulating flange to intake manifold | M10/M20/M30 | 10 Nm |
| 4AZ Idling shut off valve; max | M10/M20/M30 | 5 Nm |
| 5AZ Flow valve; max | M10/M20/M30 | 28 Nm |
| 6AZ Throttle valve assembly to float housing; max | M10/M20/M30 | 9 Nm |
| 8AZ Throttle valve control to carburetor; max. | 2BE | 3 Nm |
| 9AZ Warm-up regulator to engine | M10/M20/M30 | 23 Nm |