18 20 Exhaust system suspension
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST SYSTEM SUSPENSION
| Type | Thread | Measure | |
|---|---|---|---|
| 1AZ Exhaust system to manifold | N52 / N52K / N51 | M10 nut | 45 Nm |
| 2AZ Preliminary pipe bracket to transmission | N52 / N52K / N51 | M8 | 21 Nm |
| 3AZ Bracket to rear differential | N52 / N46 / M47T2 / M57T2 | M12 nut | 30 Nm |
| 4AZ Bracket, rear muffler, to support plate | N52 / N52K / N51 | M8 nut | 21 Nm |
| 5AZ Rear muffler to body | N52 / N52K / N51/ M47T2 | M8 nut | 21 Nm |
| 6AZ Exhaust system to transmission | M47T2 | ASA M8 bolt | 21 Nm |
| 7AZ Exhaust system to body | N52 / N52K / N51, | M8 | 21 Nm |
| 8AZ Clamp | N52 / N52K / N51 | 45 Nm |