24 32 Governor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - GOVERNOR
| Type | Thread | Measure | |
|---|---|---|---|
| 1AZ Governor flange to transmission | A4S 200R / A4S 270R / A4S310R/ A5S 300J / A5S310Z/ A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z/ GA6HP26Z/ GA6HP32Z | M8 | 16 Nm |
| 2AZ Threaded pin to centrifugal governor | A4S 200R / A4S 270R / A4S310R/ A5S 300J / A5S310Z/ A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z/ GA6HP26Z/ GA6HP32Z | M6 | 3 Nm |
| 3AZ Hexagon nut to threaded pin | A4S 200R / A4S 270R / A4S310R/ A5S 300J / A5S310Z/ A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z/ GA6HP26Z/ GA6HP32Z | 10 Nm | |
| 4AZ Hexagon head screw on centrifugal governor | A4S 200R / A4S 270R / A4S310R/ A5S 300J / A5S310Z/ A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z/ GA6HP26Z/ GA6HP32Z | M6 | 11 Nm |
| 5AZ Governor housing to hub | 4HP-22H | M6 | 11 Nm |