24 11 Transmission Case, Oil Sump
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION CASE, OIL SUMP
| Type | Thread | Measure | |
|---|---|---|---|
| 8AZ Oil filler pipe | 3HP-22 | 105 Nm | |
| 4HP-22 / 4HP-24 / A5S310Z | 98 Nm | ||
| 9AZ Plug | A4S 200R / A4S 270R / A4S310R/ A5S 300J / A5S310Z/ A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z/ GA6HP26Z/ GA6HP32Z | M18 | 43 Nm |
| 10AZ Oil duct screw plugs | A5S 300J | 8 Nm | |
| A5S 310Z / A5S 560Z | 15 Nm | ||
| 11AZ Damper cover on transmission case | A5S 300J | M6 | 10 Nm |
| 12AZ Radial shaft seal to converter housing | A4S 270R / A4S310R/ A5S 360R / A4S 360R | M4 | 3 Nm |
| 13AZ Intermediate plate on intermediate housing | A4S 270R / A4S310R | 5/16 inch | 25 Nm |