51 11 Front Bumper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT BUMPER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bumper to bracket | E32 | M6 | 9 Nm | |
| E36 | M8 | 22 Nm | ||
| E34 | M10 | 43 Nm | ||
| 2AZ Bumper and bracket to impact absorber | E31 | M10 | Install bolts with bolt cement. | 22 Nm |
| E38/ E39/ E46 | M10 | 41 Nm | ||
| E36 | M10 | Install bolts with bolt cement. | 55 Nm | |
| E32/ E34/ E30/ Mod. 88 | M12 | 48 Nm | ||
| E52 | 38 Nm | |||
| 3AZ Impact absorber/bracket to body | E30/ E24 | 23 Nm | ||
| E31 / E32/ E34/ E36/ E38/ E39 | M6 | 9 Nm | ||
| E32/ E34 | M10 | 48 Nm | ||
| E46/ E52 | M8 | 20 Nm | ||
| 4AZ Carrier to body E46/ E65/ E66/ E67 | M8 | 18 Nm | ||
| E60/ E61 / E63/ E64 | M8 | 21 Nm | ||
| 5AZ Carrier to deformation element | E85/ E86 | M10 | 38 Nm | |
| E85/ E86 | M6 | 8 Nm | ||
| E83 | M8 | 28 Nm | ||
| 6AZ Deformation element to body | E85/ E86 | M8 | 19 Nm | |
| E83 | M8 | 25 Nm | ||
| 7AZ License plate to bumper | E46/ E60/ E61 / E63/ E64/ E65/ E66 | 1 Nm | ||
| 8AZ License plate to bumper (thread repair) | E46/ E60/ E61 / E63/ E64/ E65/ E66 | M5 | 4.5 Nm | |
| 9AZ Bumper to front end | E60/ E61 | 5 Nm |