11 12 Cylinder Head with Cover N52K B25
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD SPECIFICATION
| Cylinder head height: Original dimension | mm | 112.000 ± 0.050 |
| Machining limit | mm | 111.700 ± 0.050 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Original inlet valve | mm | 5.000+0.012 |
| Original exhaust valve | mm | 6.000+0.012 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | 0.500 |